|
| |
 |
Self-Lubricating-Bronze L-Gibs |
| Cam
Forming Die |
 |
Self-lubricating-bronze L-gibs in a cam forming die can provide
low friction surfaces for guiding the slide's movements. In operation, the cam-driver
pushes the slide toward the anvil to wrap the sheet metal under the anvil when the die is
closed. When the die is opened, the return-spring pushes the slide away from the anvil
enabling part ejection. Grease fittings or other lubrication means are not required for
these L-gibs. |
Back to Top
| Custom
Mold Slide |
 |
| Self-lubricating-bronze L-gibs in a mold can provide low friction surfaces for
guiding the slide's movements. In operation, the angle-pin and heel-block push the slide
to the left to close the molding cavity when the mold is closed. When the mold is opened,
the angle-pin pulls the slide away from the molded part enabling part ejection. These gibs
can be ordered without screw holes so that custom screw hole locations can be installed at
assembly to avoid water lines. Grease fittings or other lubrication means are not needed
for these L-gibs. The slide can be made of 4140 steel, P20 steel, or other materials. |
Back to Top
|
